manualshive.com logo in svg

Dell Latitude 13, Service Manual

Share
Download
Dell Latitude 13 Service Manual Download Page 22

Back to Contents Page

  

ExpressCard/SD Card Reader 

Dell™ Latitude™ 13 Service Manual

 

Removing the ExpressCard/SD Card Reader 

 

1.

Follow the procedures in 

Before Working Inside Your Computer

.  

2.

Remove the 

ExpressCard

, if applicable.  

3.

Remove the 

SD card

, if applicable.  

4.

Remove the 

base cover

.  

5.

Remove the 

battery

.  

6.

Remove the 

hard drive and audio board

.  

7.

Remove the 

WLAN card

.  

8.

Remove the 

LED cover

.  

9.

Remove the 

memory

.  

10.

Remove the 

keyboard

.  

11.

Remove the screws that secure the card reader to the computer. 

  

12.

Carefully turn over the computer.  

13.

Lift the clip that secures the hard-drive data cable to the system board and disconnect it from its connector on the system board.

  

14.

Lift the card reader up and away from the computer. 

  

Replacing the Card Reader 

To replace the card reader, perform the above steps in reverse order.  
 

Back to Contents Page

  

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

NOTE:

 You may need to install Adobe

® 

Flash

® 

Player from 

Adobe.com

 in order to view the illustrations below. 

Summary of Contents for Latitude 13















































Reviews:

No comments

Brands by name

Popular brands

Load more brands