Dell Latitude 12 Rugged Extreme - 7204 Owner'S Manual Download Page 44

Page: 44 / 58

Option

Description

By default, all the options are checked.

You can also deselect any option or

change the boot order.

Boot List Option

Allows you to change the boot list option.
• Legacy
• UEFI

Advanced Boot
Options

This option allows you the legacy option ROMs to load. By default, the

Enable Legacy

Option ROMs

is checked.

Date/Time

Allows you to change the date and time.

Table 3. System Configuration

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The options
are:
• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.

Unmanaged NIC

This option controls the on-board USB LAN controller. This option is
enabled by default.

Parallel Port

Allows you to configure the parallel port on the docking station. The
options are:
• Disabled
• AT: This option is enabled by default.
• PS2
• ECP

Serial Port 1

Allows you to configure the integrated serial port. The options are:
• Disabled
• COM1: This option is enabled by default.
• COM3

Serial Port 2

Allows you to configure the integrated serial port. The options are:
• Disabled
• COM2: This option is enabled by default.
• COM4

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The
options are:
• Disabled
• AHCI
• RAID On: This option is enabled by default.

Summary of Contents for Latitude 12 Rugged Extreme - 7204



























































Search results

Summary of Contents for Latitude 12 Rugged Extreme - 7204

Reviews:

Related manuals for Latitude 12 Rugged Extreme - 7204

Brands by name

Popular brands

Dell Latitude 12 Rugged Extreme - 7204, Owner'S Manual

Search results

Summary of Contents for Latitude 12 Rugged Extreme - 7204

Reviews:

Related manuals for Latitude 12 Rugged Extreme - 7204

Brands by name

Popular brands