Installing the Memory Module
1.
Insert the memory module into the memory socket.
2.
Press the memory module down until it clicks into place.
3.
Install:
a.
bottom cover
b.
battery
4.
Follow the procedures in
After Working Inside Your computer
.
Removing the MEMS Board
MEMS board is also known as the sensor board.
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
bottom cover
3.
To remove the MEMS board:
a. Disconnect the cable connected to the MEMS board [1,2].
b. Remove the screws that secure the MEMS board to the computer chassis [3].
c. Lift the MEMS board from the computer chassis [4].
14