Removing the Optical-Drive Assembly |
15
Removing the Optical-Drive Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
Remove the battery. See "Removing the Battery" on page 10.
Procedure
1
Remove the screw that secures the optical-drive assembly to the computer base.
2
Using your fingertips, slide the optical-drive assembly out of the optical-drive bay.
1
optical-drive assembly
2
screw
1
2
OM_Book.book Page 15 Monday, April 8, 2013 11:55 AM