manualshive.com logo in svg

Dell Inspiron D27M, Service Manual, Page: 87 / 150

Share
Download
Dell Inspiron D27M Service Manual Download Page 87

Identifier

GUID-B39A6E88-5BE8-4905-936B-086878866EBD

Status

Released

Replacing the graphics card

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before 

working inside your computer

. After working inside your computer, follow 

the instructions in 

After working inside your computer

. For more safety best 

practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

 

Identifier

GUID-C9649708-F58C-4617-9929-7882603C8259

Status

Released

Procedure

1 

Align the graphics card with the slot on the chassis.

2 

Align and place the graphics card into the slot on system board and press down 
firmly until the graphics card snaps into place.

3 

Replace the screw (6-32UNCx3.6) that secures the graphics card to the chassis.

Identifier

GUID-18E03B03-9F85-4F4B-BCF8-AFD70DA271BA

Status

Released

Procedure

Only with computers shipped with AMD Ryzen 3/Ryzen 5/Ryzen 7 processors

1 

Align the graphics card with the slot on the chassis.

2 

Align and place the graphics card into the slot on system board and press down 
firmly until the graphics card snaps into place.

3 

Replace the two screws (6-32UNCx3.6) that secure the graphics card to the 
chassis.

4 

Connect the graphics-card cable to the graphics card.

87

Summary of Contents for Inspiron D27M























































































































































Reviews:

No comments