manualshive.com logo in svg

Dell Inspiron D27M, Service Manual, Page: 141 / 150

Share
Download
Dell Inspiron D27M Service Manual Download Page 141

Identifier

GUID-7C4079DF-9FF4-48AC-A162-4A939A8B2557

Status

Released

BIOS setup program

Identifier

GUID-81F87C9E-449F-4237-AD63-AA5CB955CC91

Status

Released

BIOS overview

The BIOS manages data flow between the computer's operating system and attached 
devices such as hard disk, video adapter, keyboard, mouse, and printer.

Identifier

GUID-1432A924-49E9-4080-961D-2AFBDAF42039

Status

Released

Entering BIOS setup program

1 

Turn on (or restart) your computer.

2 

During POST, when the DELL logo is displayed, watch for the F2 prompt to 
appear, and then press F2 immediately.

NOTE: The F2 prompt indicates that the keyboard is initialized. This 
prompt can appear very quickly, so you must watch for it, and then 
press F2. If you press F2 before the F2 prompt, this keystroke is lost. If 
you wait too long and the operating system logo appears, continue to 
wait until you see the desktop. Then, turn off your computer and try 
again.

141

Summary of Contents for Inspiron D27M























































































































































Reviews:

No comments