Dell Inspiron 8000 Solution Manual Download

Page: 53 / 96

Adding Parts

Undocking the Computer

NOTICE:

If you do not have a charged battery installed in the computer when

you undock the computer, you may lose unsaved data.

NOTICE:

If you do not use correct undocking procedures, you may lose data

and the computer may not restart.

Save and close all open files and exit all open programs.

Perform one of the following procedures:
• Click the

Start

button, and then click

Eject PC

After a few seconds, the computer power light turns off.

• Press the undock request button on the APR.

After a few seconds, the green docking light turns off.

Slide the eject/locking lever on the left side of the APR to the eject

position to undock the computer.

docking connector

alignment rails (2)

eject/locking lever

Summary of Contents for Inspiron 8000

































































































Search results

Summary of Contents for Inspiron 8000

Reviews:

Related manuals for Inspiron 8000

Brands by name

Popular brands

Dell Inspiron 8000, Solution Manual

Search results

Summary of Contents for Inspiron 8000

Reviews:

Related manuals for Inspiron 8000

Brands by name

Popular brands