manualshive.com logo in svg

Dell Inspiron 7786, Service Manual

Share
Download
Dell Inspiron 7786 Service Manual Download Page 71

Removing the display hinges

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

Prerequisites

1 

Remove the 

base cover

.

2 

Remove the 

wireless card

.

3 

Remove the 

fan

.

4 

Remove the 

heat sink

.

5 

Remove the 

display assembly

.

6 

Remove the 

display panel

.

Procedure

1 

Remove the six screws (M2.5x2.5) that secure the hinges to the display back-cover and antenna assembly.

2 

Remove the two screws (M2x3) that secure the hinge brackets to the display back-cover and antenna assembly.

3 

Remove the antenna cables out from the hinge covers.

4 

Lift the hinges and brackets off the display back-cover and antenna assembly.

46

Removing the display hinges

71

Summary of Contents for Inspiron 7786

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands