manualshive.com logo in svg

Dell Inspiron 7506 2-in-1 Black, Service Manual

Introducing the Dell Inspiron 7506 2-in-1 Black - an incredible device designed for versatile performance. Get the most out of your purchase by accessing its comprehensive "Setup And Specifications" manual. Download it now for free from our website and unleash the full potential of your Dell Inspiron 7506 2-in-1 Black.

Share
Download
background image

Steps

1. Remove the two screws (M2x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
2. Remove the screw (M2.5x5) that secures the left display hinge to the palm-rest and keyboard assembly.
3. Open the left display hinge at an angle of 90 degrees.
4. Using the pull tab, disconnect the I/O-board cable from the I/O board.
5. Disconnect the coin-cell battery cable from the I/O board.
6. Peel the tape that secures the fingerprint reader-cable to the I/O board.
7. Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
8. Open the latch, and disconnect the fingerprint reader-cable from the I/O board.
9. Slide and lift the I/O board off the palm-rest and keyboard assembly.

Installing the I/O board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

Removing and installing components

39

Summary of Contents for Inspiron 7506 2-in-1 Black











































































Reviews:

No comments

Related manuals for Inspiron 7506 2-in-1 Black

IBM ThinkPad 770X Supplementary Manual preview
ThinkPad 770X
Brand: IBM Pages: 2
IBM ThinkPad 560Z User Manual preview
ThinkPad 560Z
Brand: IBM Pages: 189
IBM ThinkPad 600 Reference Manual preview
ThinkPad 600
Brand: IBM Pages: 147
Fujitsu Siemens Computers Amilo L1310G Datasheet preview
Amilo L1310G
Brand: Fujitsu Siemens Computers Pages: 3
Magicbook SHB-V7S6 User Manual preview
SHB-V7S6
Brand: Magicbook Pages: 113
Dell Inspiron 1428 Service Manual preview
Inspiron 1428
Brand: Dell Pages: 82
Dell Inspiron 15 Specifications preview
Inspiron 15
Brand: Dell Pages: 6
Toshiba Qosmio G30 G30-153 Specifications preview
Qosmio G30 G30-153
Brand: Toshiba Pages: 2
Toshiba Qosmio M0026290 Brochure preview
Qosmio M0026290
Brand: Toshiba Pages: 2
Toshiba L655-S5097 Specifications preview
L655-S5097
Brand: Toshiba Pages: 4
Toshiba Qosmio X505 Specifications preview
Qosmio X505
Brand: Toshiba Pages: 4
Toshiba R10-S4422 Specifications preview
R10-S4422
Brand: Toshiba Pages: 5
Toshiba R10-S4421 Specifications preview
R10-S4421
Brand: Toshiba Pages: 5
Toshiba Qosmio G45 Specifications preview
Qosmio G45
Brand: Toshiba Pages: 5
Toshiba Qosmio X870 Series User Manual preview
Qosmio X870 Series
Brand: Toshiba Pages: 164
Toshiba Qosmio X70-A series User Manual preview
Qosmio X70-A series
Brand: Toshiba Pages: 193
Toshiba Qosmio G45 User Manual preview
Qosmio G45
Brand: Toshiba Pages: 245
Toshiba Qosmio X300 Series Maintenance Manual preview
Qosmio X300 Series
Brand: Toshiba Pages: 255

Brands by name

Popular brands

Load more brands