Dell Inspiron 7420 Service Manual Download Page 48

Page: 48 / 85

9. Remove the

heatsink assembly

CAUTION:

Remove the heatsink assembly before removing the system board as there are two (M2x3) screws

underneath the heatsink that secures the system board to the computer.

NOTE:

For configurations shipped with a carbon fiber palmrest and without WWAN antennas, the dummy SIM card tray

must removed from the system before removing the system board.

To remove the dummy SIM card tray, push the release latch inwards and then slide dummy card tray out of the computer.

NOTE:

For non-WWAN configurations, remove the WWAN card shield and WWAN card bracket before removing the

system board.

About this task

The following images indicate the location of the system board and provide a visual representation of the removal procedure.

Removing and installing components

Summary of Contents for Inspiron 7420






















































































Search results

Summary of Contents for Inspiron 7420

Reviews:

Related manuals for Inspiron 7420

Brands by name

Popular brands

Dell Inspiron 7420, Service Manual

Search results

Summary of Contents for Inspiron 7420

Reviews:

Related manuals for Inspiron 7420

Brands by name

Popular brands