Dell Inspiron 7420 Service Manual Download

Page: 32 / 85

3. Connect the speaker cable to the speaker board and reroute the speaker cable into its routing channel over the upper right

side of the battery.

4. Connect the battery cable to the system board.

Next steps

1. Install the

base cover

2. Install the

microSD card

3. Follow the procedure in

after working inside your computer

Heatsink assembly

Removing the heatsink assembly

Prerequisites

1. Follow the procedure in

before working inside your computer

2. Remove the

microSD card

3. Enter the

service mode

4. Remove the

base cover

About this task

The following images indicate the location of the heatsink assembly and provide a visual representation of the removal
procedure.

Steps

1. Disconnect the fan cable from the system board.
2. Remove the two (M2x2.5) screws on the fan case and the four (M2x2.5) screws (in reverse order, 4->3->2->1) that secure

the heatsink to the computer.

3. Lift the heatsink assembly from the computer.

Removing and installing components

Summary of Contents for Inspiron 7420






















































































Search results

Summary of Contents for Inspiron 7420

Reviews:

Related manuals for Inspiron 7420

Brands by name

Popular brands

Dell Inspiron 7420, Service Manual

Search results

Summary of Contents for Inspiron 7420

Reviews:

Related manuals for Inspiron 7420

Brands by name

Popular brands