4. Install the
.
5. Install the
6. Install the
.
7. Install the
.
8. Install the
.
9. Follow the procedure
after working inside your computer
.
Power-Button Board
Removing the power-button board
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
9. Remove the
.
10. Remove the
.
11. Remove the
1. Remove the two (M2x2.5) screws, that secure the power-button board to the palmrest assembly [1].
2. Remove the power-button board from its slot, in the palmrest assembly [2].
NOTE:
Power-button board with Finger Print Reader (FPR), has a cable that
from the system board.
Removing and installing components
81
Summary of Contents for Inspiron 7400
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 60: ...3 Route the antennae and display cable along the hinges 60 Removing and installing components ...
Page 82: ...Figure 3 Power button board without FPR 82 Removing and installing components ...
Page 84: ...Figure 5 Power button board without FPR 84 Removing and installing components ...
