Removing the power button with fingerprint
reader
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Prerequisites
1. Remove the
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
Procedure
1. Disconnect the fingerprint-reader cable from the system board and peel the fingerprint-reader cable off the palm-rest
assembly.
2. Remove the screw (M3x3) that secures the power-button board to the palm-rest assembly.
3. Using a plastic scribe, peel the power-button board from the palm-rest assembly.
4. Lift the power-button board, along with its cable, off the palm-rest assembly.
28
Removing the power button with fingerprint reader
47
Summary of Contents for Inspiron 7386
