manualshive.com logo in svg

Dell Inspiron 5735, Owner'S Manual

Share
Download
Dell Inspiron 5735 Owner'S Manual Download Page 47

Replacing 

the 

Heat 

Sink  |  

47

Replacing the Heat Sink

 

WARNING:  Before working inside your computer, read the safety information that 
shipped with your computer and follow the steps in "Before Working Inside Your 
Computer" on page 9. After working inside your computer, follow the instructions 
in "After Working Inside Your Computer" on page 11. For additional safety best 
practices information, see the Regulatory Compliance Homepage at 

 

dell.com/regulatory_compliance.

Procedure

1

Clean the thermal grease from the bottom of the heat sink and reapply it.

2

Align the screw holes on the heat sink with the screw holes on the system board.

3

In sequential order (indicated on the heat-sink), replace the screws that secure the 
heat sink to the system board.

Postrequisites

1

Follow step 5 to step 11 in "Replacing the System Board" on page 42.

2

Replace the wireless card. See "Replacing the Wireless Card" on page 35.

3

Replace the palm rest. See "Replacing the Palm Rest" on page 32.

4

Replace the keyboard. See "Replacing the Keyboard" on page 19.

5

Replace the base cover. See "Replacing the Base Cover" on page 21.

6

Follow step 3 to step 4 in "Replacing the Optical Drive" on page 16.

7

Follow step 3 to step 5 in "Replacing the Hard Drive" on page 26.

8

Replace the battery. See "Replacing the Battery" on page 13.

book.book  Page 47  Wednesday, October 2, 2013  3:11 PM

Summary of Contents for Inspiron 5735








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands