Dell Inspiron 5735 Owner'S Manual Download Page 2

Page: 2 / 71

Notes, Cautions, and Warnings

NOTE:

A NOTE indicates important information that helps you make better

use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage,

personal injury, or death.

____________________

Trademarks used in this text: Dell

™

, the DELL logo, and Inspiron

™

are trademarks of Dell Inc.;

Microsoft

, Windows

, and the Windows start button logo are either trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other countries;

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under

license.

2013 - 10

Rev. A00

book.book Page 2 Wednesday, October 2, 2013 3:11 PM

Summary of Contents for Inspiron 5735








































































Search results

Summary of Contents for Inspiron 5735

Reviews:

Related manuals for Inspiron 5735

Brands by name

Popular brands

Dell Inspiron 5735, Owner'S Manual

Search results

Summary of Contents for Inspiron 5735

Reviews:

Related manuals for Inspiron 5735

Brands by name

Popular brands