background image

NOTE:

 If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click 

Drivers & downloads

 > 

Find it myself

.

5. Select the operating system installed on your computer.
6. Scroll down the page and expand 

BIOS

.

7. Click 

Download

 to download the latest version of the BIOS for your computer.

8. After the download is complete, navigate to the folder where you saved the BIOS update file.
9. Double-click the BIOS update file icon and follow the instructions on the screen.

Backup media and recovery options

It is recommended to create a recovery drive to troubleshoot and fix problems that may occur with Windows. Dell proposes multiple
options for recovering Windows operating system on your Dell PC. For more information. see 

Dell Windows Backup Media and Recovery

Options

.

WiFi power cycle

About this task

If your computer is unable to access the internet due to WiFi connectivity issues a WiFi power cycle procedure may be performed. The
following procedure provides the instructions on how to conduct a WiFi power cycle:

NOTE:

 Some ISPs (Internet Service Providers) provide a modem/router combo device.

Steps

1. Turn off your computer.
2. Turn off the modem.
3. Turn off the wireless router.
4. Wait for 30 seconds.
5. Turn on the wireless router.
6. Turn on the modem.
7. Turn on your computer.

Flea power release

About this task

Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has been
removed. The following procedure provides the instructions on how to conduct flea power release:

Steps

1. Turn off your computer.
2. Remove the 

base cover

.

3. Remove the 

3-cell battery

 or 

4-cell battery

.

4. Press and hold the power button for 15 seconds to drain the flea power.
5. Install the 

3-cell battery

 or 

4-cell battery

.

6. Install the 

base cover

.

7. Turn on your computer.

78

Troubleshooting

Summary of Contents for Inspiron 5505
















































































Reviews: