Replacing the Power-Button Module |
39
Replacing the Power-Button Module
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align and push the power-button module tabs into the slots on the front panel.
2
Connect the power-button module cable to the system board connector (LEDH1).
See "System-Board Components" on page 11.
3
Route the power-button module cable through its routing guide.
Postrequisites
1
Replace the front bezel. See "Replacing the Front Bezel" on page 20.
2
Replace the computer cover. See "Replacing the Computer Cover" on page 13.
book.book Page 39 Tuesday, November 12, 2013 1:54 PM
