Dell Inspiron 3668 Service Manual Download Page 9

Page: 9 / 96

Before working inside your

computer

NOTE: The images in this document may differ from your computer
depending on the configuration you ordered.

Before you begin

Save and close all open files and exit all open applications.

Shut down your computer. Click

Start

→

Power

→

Shut down

NOTE: If you are using a different operating system, see the
documentation of your operating system for shut-down instructions.

Disconnect your computer and all attached devices from their electrical outlets.

Disconnect all attached network devices and peripherals, such as keyboard,
mouse, and monitor from your computer.

Remove any media card and optical disc from your computer, if applicable.

After the computer is unplugged, press and hold the power button for 5 seconds
to ground the system board.

Summary of Contents for Inspiron 3668

































































































Search results

Summary of Contents for Inspiron 3668

Reviews:

Related manuals for Inspiron 3668

Brands by name

Popular brands

Dell Inspiron 3668, Service Manual

Search results

Summary of Contents for Inspiron 3668

Reviews:

Related manuals for Inspiron 3668

Brands by name

Popular brands