Dell Inspiron 3520 Owner'S Manual Download Page 69 | Manualshive

Page: 69 / 104

background image

Option

Description

Full Screen Logo

This option will display full screen logo if your image match screen resolution

●

Enable Full Screen Logo

Warnings and
Error

This option will cause the boot process to only pause when warnings or errors are detected.

●

Prompt on Warnings and Errors This option is enabled by default.

●

Continue on Warnings

●

Continue on Warnings and Errors

NOTE:

Error deemed critical to the operation of the system hardware will always halt the system.

Virtualization support screen options

Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.

Enable Intel Virtualization Technology: This option is enabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.

Enable VT for Direct I/O: This option is enabled by default.

Trusted
Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and Virtualization technology for direct I/O must be enabled to use this feature.

Trusted Execution: This option is enabled by default.

Wireless screen options

Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless switch. The options are:

●

WWAN

●

GPS (on WWAN Module)

●

WLAN/WiGig

●

Bluetooth

All the options are enabled by default.

NOTE:

For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled

or disabled independently.

Wireless Device
Enable

Allows you to enable or disable the internal wireless devices.

●

WWAN/GPS

●

WLAN/WiGig

●

Bluetooth

All the options are enabled by default.

Maintenance screen options

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.

System setup options

69

«
...
67
68
69
70
71
...
»

Summary of Contents for Inspiron 3520









































































































Reviews:

No comments

Related manuals for Inspiron 3520

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 56

Toughbook CF-18 Series

Brand: Panasonic Pages: 48

Aspire 5335 Series

Brand: Acer Pages: 154

Aspire 1420P Series

Brand: Acer Pages: 216

Toughbook CF-Y5LWEZZBM

Brand: Panasonic Pages: 36

Blade Pro RZ09-0287

Brand: Razer Pages: 18

M190S World Warrior

Brand: EUROCOM Pages: 149

Brand: Tandy Pages: 71

Brand: Dell Pages: 56

ActionNote 800 Series

Brand: Epson Pages: 17

Brand: Haier Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands