Dell Inspiron 3490 Service Manual Download Page 80

Page: 80 / 86

Secure Boot

Secure Boot Mode

Modifies the behavior of Secure Boot to allow evaluation or enforcement of UEFI
driver signatures.

Expert Key Management

Expert Key Management

Enable or disable Expert Key Management.

Custom Mode Key Management

Select the custom values for expert key management.

Table 8. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

Enclave Memory Size

Set the Intel Software Guard Extensions Enclave Reserve Memory Size.

Performance

Multi Core Support

Enable multiple cores.

Default: Enabled.

Intel SpeedStep

Enable or disable Intel Speedstep Technology.

Default: Enabled.

NOTE:

If enabled, the processor clock speed and core voltage are

adjusted dynamically based on the processor load.

C-States Control

Enable or disable additional processor sleep states.

Default: Enabled.

Intel TurboBoost

Enable or disable Intel TurboBoost mode of the processor.

Default: Enabled.

HyperThread control

Enable or disable HyperThreading in the processor.

Default: Enabled.

Power Management

AC Behavior

Enables the system to turn on automatically, when AC power is supplied.

Enable Intel Speed Shift Technology

Enable or disable Intel Speed Shift Technology.

Auto On Time

Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays or Selected Days.

Default: Disabled.

USB Wake Support

Enable the USB devices to wake the computer from Standby.

Block Sleep

Enable or disable Block Sleep.

Advanced Battery Charge Configuration

Enable Advanced Battery Charge Configuration from the beginning of the day to a
specified work period.

Primary Battery Charge Configuration

Set the primary battery charge settings with a preselected custom charge start and
stop.

Default: Adaptive.

POST Behavior

Adapter Warnings

Enable adapter warnings.

Default: Enabled.

Numlock Enable

Enables the NumLock funcltion when computer boots.

System setup

Summary of Contents for Inspiron 3490























































































Search results

Summary of Contents for Inspiron 3490

Reviews:

Related manuals for Inspiron 3490

Brands by name

Popular brands

Dell Inspiron 3490, Service Manual

Search results

Summary of Contents for Inspiron 3490

Reviews:

Related manuals for Inspiron 3490

Brands by name

Popular brands