Dell Inspiron 3470 Service Manual Download Page 62

Page: 62 / 82

Replacing the system board

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

NOTE:

Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program

after you replace the system board.

NOTE:

Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must

make the appropriate changes again after you replace the system board.

Topics:

•

Procedure

•

Post-requisites

Procedure

Align the system board with the slots on the chassis and place the system board in position.

Replace the six screws (#6-32xL6.35) that secure the system board to the chassis.

Connect the optical-drive data cable to the system board.

Connect the power-supply unit cable to the system board.

Replacing the system board

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands