Dell Inspiron 3470 Service Manual Download Page 53

Page: 53 / 82

Replacing the power-supply unit

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Procedure

•

Post-requisites

Procedure

Place the power-supply unit on the chassis.

Slide the power-supply unit towards the back of the chassis until it snaps into place.

Align the screw holes on the power-supply unit with the screw holes on the chassis.

Replace the three screws (#6-32xL6.35) that secure the power-supply unit to the chassis.

Route the power-supply unit cable through the routing guides inside the chassis.

Connect the power-supply unit cables (ATX_CPU and ATX_SYS) to the system board.

Replacing the power-supply unit

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands