Dell Inspiron 3470 Service Manual Download Page 47

Page: 47 / 82

Removing the power-button module

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the

computer cover

Remove the

front bezel

Follow the procedure from step 1 to step 6 in “

Removing the optical drive

”.

Procedure

Remove the screw (#6-32xL6.35) that secures the front-I/O bracket to the chassis.

Gently release the ports on the front-I/O bracket from the slots on the chassis and lift the front-I/O bracket off the chassis.

Disconnect the power-button cable from the system board.

Press the tabs on the power-button module to release the module from the front panel.

Removing the power-button module

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands