Dell Inspiron 3470 Service Manual Download Page 31

Page: 31 / 82

Replacing the optical drive

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Topics:

•

Procedure

•

Post-requisites

Procedure

Align and replace the optical-drive bezel to the optical drive.

Slide the optical drive into the optical-drive cage

Align the screw holes on the optical drive with the screw holes on the drive cage and replace the three screws (M2xL2) that secure
the optical drive to the drive cage.

Place the drive cage on the chassis.

Connect the data cable and power cable to the optical drive.

Connect the data cables and power cables to the hard drives.

Replacing the optical drive

Summary of Contents for Inspiron 3470



















































































Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands

Dell Inspiron 3470, Service Manual

Search results

Summary of Contents for Inspiron 3470

Reviews:

Related manuals for Inspiron 3470

Brands by name

Popular brands