Replacing the drive cage
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Replace the
optical drive
, if applicable.
2
Replace the
2.5–inch hard drive
.
or
Slide and place the 3.5 inch hard-drive assembly into the drive cage, if
installed.
3
Align the tab on the drive cage to the slot on the chassis.
4
Slide the drive cage into the chassis.
5
Replace the screws that secure the drive cage to the chassis.
6
Connect the power cables and data cables to all the drives.
NOTE: The number and type of drives varies depending on the
configuration you ordered.
Post-requisites
1
Replace the
heat-sink assembly
.
2
Replace the
front bezel
.
3
Replace the
computer cover
.
49
Summary of Contents for Inspiron 3250
