3
2
–
After Cloning:
d.
Remove the new SSD from the
External Drive Enclosure
e.
Turn off the power to your
Computer. Disconnect the power
supply and remove the battery
pack (if removable)
f.
If present, remove the System
Drive Bracket and reassemble with
the new SSD
g.
If your SSD was supplied with an
adaptor/spacer and you are
installing into a Laptop, you may
need this to match the depth of
the SSD with the Old Drive.
Remove the adhesive backing
from the adaptor, align it with the
outer edges on the label-side of
the SSD and firmly press the
adhesive side onto the SSD
surface
h.
Alternatively, at this stage, you
may need to install the SSD into a
3.5” SATA Drive Carrier
i.
Install the reassembled SSD into
the Drive Bay of the Computer
j.
Replace the panel or enclosure
and turn on your Computer
