2
Before you begin…
If you are cloning the original Drive
–
ensure that the USED capacity of the old Drive is
LESS than the capacity of the new SSD
Back-up all important data on the old Drive to an external storage device
–
such as a
USB Hard Drive or DVD
Version A - Replacing an existing Drive
This guide assumes that you are replacing an existing Drive and you do not have a spare
Drive Bay (this is the most likely scenario if you are upgrading a Laptop and some All-in-
One Computers).
If your device has more than 1 Drive Bay and you want to leave the old Drive installed,
please follow Version B on Page 4
1
–
Before Cloning
a.
Insert the SSD into the External Drive
Enclosure
b.
Using the USB Cable, connect the External
Drive Enclosure to the Computer
c.
You are now ready to copy the Data from
the Original Drive to the SSD
–
please refer
to the Cloning Section below on Page 5
Installation
Replacing an Old Drive with a new SSD?
–
Follow Version A below
(e.g. Upgrading your Laptop or All-in-One Hard Drive)
Installing new SSD alongside Old Drive?
–
Follow Version B on Page 4
(e.g. Desktop or Server with an additional Drive Bay)
