Steps
1. Align the screw holes on the stand with the screw holes on the display-assembly base and slide the stand on the display-assembly
base.
2. In the sequential order indicated on the stand, replace the eight screws (M3x4) that secure the stand to the display-assembly base.
Next steps
1. Install the
2. Install the
3. Follow the procedure in
After working inside your computer
.
Hard drive
Removing the hard drive
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
About this task
The following image indicates the location of the hard drive and provides a visual representation of the removal procedure.
16
Removing and installing components
