Steps
1. Slide and place the retractable-camera assembly on the display-assembly base.
2. Replace the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base.
3. Adhere the tape that secures the camera cable to the display-assembly base.
4. Connect the camera cable to the system board.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Install the
.
After working inside your computer
.
Fan
Removing the fan
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
About this task
The following image indicates the location of the fan and provides a visual representation of the removal procedure.
36
Removing and installing components
