Steps
1. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
2. Replace the four screws (M3x3.5) that secure the hard-drive bracket to the hard drive.
3. Slide the hard-drive assembly into the slot on the display-assembly base.
4. Replace the screw (M3x5) that secures the hard-drive assembly to the display-assembly base.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
System-board shield
Removing the system-board shield
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
About this task
The following image indicates the location of the system-board shield and provides a visual representation of the removal
procedure.
Removing and installing components
23
