manualshive.com logo in svg

Dell Inspiron 17 5755, Service Manual

The Dell Inspiron 17 5755 Service Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and troubleshooting tips for your Dell Inspiron 17 5755. Enhance your product knowledge and optimize its performance with this user-friendly manual. Download it today from manualshive.com!

Share
Download
background image

Replacing the base cover

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before working inside your computer

. After working inside your 

computer, follow the instructions in 

After working inside your 

computer

. For more safety best practices, see the Regulatory 

Compliance home page at dell.com/regulatory_compliance. 

 

Procedure

1 

Slide the tabs on the base cover into the slots on the computer base and 

snap the base cover into place.

2 

Replace the screws that secure the base cover to the computer base.

Post-requisites

Replace the 

battery

.

18

Summary of Contents for Inspiron 17 5755













































































































Reviews:

No comments

Related manuals for Inspiron 17 5755

Brands by name

Popular brands

Load more brands