GUID-2DF70EB1-9D26-4051-8B7C-FB14A89925D8
Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
GUID-F11AC970-2513-4EFB-A6EE-2BB2203AA6D1
Procedure
1
Slide and place the palm rest and keyboard assembly on the display assembly.
2
Using the alignment posts, press the display hinges down on the palm rest and
keyboard assembly.
3
Align the screw holes on the display hinges with the screw holes on the palm rest
and keyboard assembly.
4
Replace the screws that secure the display hinges to the palm rest and keyboard
assembly.
5
Route the display cable through the routing guides on the palm rest and
keyboard assembly.
6
Adhere the tape that secures the display cable to the palm rest and keyboard
assembly.
7
Slide the display cable to the connector on the system board and close the latch
to secure the cable.
GUID-1223BDD5-9B6F-4F20-B7E4-188E1FECED8C
Post-requisites
1
Replace the
.
2
Replace the
.
3
Replace the
.
67
Summary of Contents for Inspiron 17 5000 Series
Page 17: ...5 Remove the optical drive bracket 1 optical drive 2 M2x3 screws 2 3 optical drive bracket 17 ...
Page 22: ...3 Lift the base cover off the palm rest and keyboard assembly at an angle 1 base cover 22 ...
Page 25: ...GUID 100F5386 1FC6 42B5 8E98 BA863F638114 Post requisites Replace the optical drive 25 ...
