Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
Procedure
1
Align the screw holes on the fan with the screw holes on the computer base.
2
Replace the screws that secure the fan to the computer base.
3
Connect the fan cable to the system board.
4
Route the I/O-board cable through the routing guides on the fan.
5
Adhere the I/O-board cable to the computer base and connect the cable to the
system board.
Post-requisites
1
Replace the
2
Replace the
50
Summary of Contents for Inspiron 15-7558
