Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1
Align the screw holes on the display hinges with the screw holes on the
computer base.
2
Replace the screws that secure the display hinges to the computer base.
3
Route the display cable through its routing guides on the computer base.
4
Route the antenna cables through its routing guides and slide the antenna cables
through the slot on the computer base.
5
Close the display and turn the computer over.
Post-requisites
1
Follow the procedure from step 3 to step 10 in “Replacing the
2
Follow the procedure from step 2 to step 6 in “Replacing the
3
Replace the
4
Replace the
.
5
Replace the
.
6
Follow the procedure from step 3 to step 5 in “Replacing the
”.
7
Replace the
.
8
Replace the
73
Summary of Contents for Inspiron 15-3559
