Dell Inspiron 15-3559 Service Manual Download Page 12

Page: 12 / 92

Removing the battery

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before

working inside your computer

. After working inside your computer, follow

the instructions in

After working inside your computer

. For more safety best

practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.

Procedure

Close the display and turn the computer over.

Slide the battery-release latch to the unlock position.

Lift the battery at an angle and remove the battery from the battery bay.

battery

battery-release latch

Turn the computer over, open the display, and press the power button for five
seconds to ground the system board.

Summary of Contents for Inspiron 15-3559





























































































Search results

Summary of Contents for Inspiron 15-3559

Reviews:

Related manuals for Inspiron 15-3559

Brands by name

Popular brands

Dell Inspiron 15-3559, Service Manual

Search results

Summary of Contents for Inspiron 15-3559

Reviews:

Related manuals for Inspiron 15-3559

Brands by name

Popular brands