Replacing the System Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer’s Service Tag is stored in the system board. You
must enter the Service Tag in the System Setup after you replace the
system board.
Procedure
1
Follow the procedure from step 1 to step 4 in “Replacing the
”.
2
Turn the system-board over.
3
Slide the system-board ports into the slots on the computer base.
4
Align the screw hole on the system board with the screw hole on the
computer base.
CAUTION: Make sure that no cables are placed under the system
board.
5
Replace the screw that secures the system board to the computer base.
6
Connect the display cable, power-adapter port cable, and speaker cable
to the system board.
7
Adhere the tape to the display cable.
Post-requisites
1
2
.
3
.
4
.
5
Follow the procedure from step 3 to step 5 in “Replacing the
6
7
.
8
.
47
Summary of Contents for Inspiron 15-3531
Page 8: ...Getting Help and Contacting Dell 82 Self Help Resources 82 Contacting Dell 82 ...
Page 23: ...Post requisites 1 Replace the base cover 2 Replace the battery 23 ...
Page 42: ...1 speaker 2 light extender tube 42 ...
Page 53: ...1 coin cell battery 2 battery socket 3 plastic scribe 53 ...