Dell Inspiron 1410 Service Manual Download | Manualshive

Page: 7 / 35

background image

Back to Contents Page

Flashing the BIOS

Dell™ Inspiron™ 1410 Service Manual

Flashing the BIOS From a CD

Flashing the BIOS From the Hard Drive

If a BIOS-update program CD is provided with the new system board, flash the BIOS from the CD. If you do not have a BIOS-update program CD, flash the
BIOS from the hard drive.

Flashing the BIOS From a CD

1.

Ensure that the AC adapter is plugged in and that the main battery is installed properly.

2.

Insert the BIOS-update program CD, and restart the computer.

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the
computer will automatically reboot.

3.

Press <F2> during POST to enter the system setup program.

4.

Press <Alt><f> to reset the computer defaults.

5.

Press <Esc>, select

Save changes and reboot

, and press <Enter> to save configuration changes.

6.

Remove the BIOS-update program CD from the drive and restart the computer.

Flashing the BIOS From the Hard Drive

1.

Ensure that the AC adapter is plugged in, the main battery is properly installed, and a network cable is attached.

2.

Turn on the computer.

3.

Locate the latest BIOS update file for your computer at

support.dell.com

.

4.

Click

Download Now

to download the file.

5.

If the

Export Compliance Disclaimer

window appears, click

Yes, I Accept this Agreement

.

The

File Download

window appears.

6.

Click

Save this program to disk

and then click

OK

.

The

Save In

window appears.

7.

Click the down arrow to view the

Save In

menu, select

Desktop

, and then click

Save

.

The file downloads to your desktop.

8.

Click

Close

if the

Download Complete

window appears.

The file icon appears on your desktop and is titled the same as the downloaded BIOS update file.

9.

Double-click the file icon on the desktop and follow the instructions on the screen.

Back to Contents Page

NOTE:

If you use a BIOS-update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.

«
...
5
6
7
8
9
...
»

Summary of Contents for Inspiron 1410




































Reviews:

No comments

Related manuals for Inspiron 1410

Brand: Gateway Pages: 72

ACE-6000 Series

Brand: Acewell Pages: 2

Brand: NEC Pages: 127

Rexroth 3 842 998 350

Brand: Bosch Pages: 122

MultiSync X463UN

Brand: NEC Pages: 6

MultiSync X551S

Brand: NEC Pages: 9

MultiSync X463UN

Brand: NEC Pages: 44

MultiSync X551UN

Brand: NEC Pages: 9

POWERMATE CT 815 - RELEASE NOTES

Brand: NEC Pages: 165

Brand: NEC Pages: 110

Brand: NEC Pages: 116

PM-ECO-900 - PowerMate Eco - 256 MB RAM

Brand: NEC Pages: 28

Brand: NEC Pages: 181

MultiSync X463UN

Brand: NEC Pages: 2

Brand: NEC Pages: 195

Brand: NEC Pages: 255

POWERMATE ES 5250 - S

Brand: NEC Pages: 276

Brand: NEC Pages: 184

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands