Replacing the Power-Adapter
Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the power-adapter port into position.
2
Route the power-adapter-port cable through the routing guides on the
computer base.
3
Connect the power-adapter-port cable to the system board.
Post-requisites
1
Replace the
palm rest
.
2
Replace the
hard drive
.
3
Replace the
wireless card
.
4
Replace the
memory module(s)
.
5
Replace the
base cover
.
6
Replace the
keyboard
.
7
Replace the
battery
.
60
Summary of Contents for Inspiron 14
