Dell Inspiron 14 7425 2-in-1 Service Manual Download Page 39 | Manualshive

Page: 39 / 66

background image

2. Remove the

.

About this task

The following image indicates the location of the I/O-board and provides a visual representation of the removal procedure.

Steps

1. Remove the two screws (M2.5x4) that secure the left-display hinge to the I/O board.
2. Pry open the left-display hinge at an angle of 90 degrees.
3. Peel the tape that secures the I/O board-connector latch to the I/O board.
4. Lift the I/O-board cable-connector latch and disconnect the I/O-board cable from the I/O board.
5. Lift the power-button with fingerprint-reader cable-connector latch and disconnect the power-button with fingerprint

reader cable from the I/O board.

6. Disconnect the coin-cell battery cable from the I/O board.
7. Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
8. Lift the I/O board off the palm-rest and keyboard assembly.

Installing the I/O board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the I/O board and provides a visual representation of the installation procedure.

Removing and installing components

39

«
...
37
38
39
40
41
...
»

Summary of Contents for Inspiron 14 7425 2-in-1



































































Reviews:

No comments

Related manuals for Inspiron 14 7425 2-in-1

ASPIRE ONE 1410

Brand: Acer Pages: 256

ASPIRE ONE 1410

Brand: Acer Pages: 105

Brand: chiliGREEN Pages: 43

Presario V3500 - Notebook PC

Brand: Compaq Pages: 175

Brand: ECS Pages: 92

Brand: Acer Pages: 92

Brand: Fujitsu Pages: 128

ESPRIMO Mobile V6505

Brand: Fujitsu Pages: 28

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands