Dell Inspiron 14 5000 Series, Service Manual

Page: 81 / 115

GUID-2DF70EB1-9D26-4051-8B7C-FB14A89925D8
Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
GUID-D58E33B9-3AEA-4FFA-99A0-8EB81E6205C7
Procedure
1 Place the palm rest at the edge of the table with the speakers facing away from
the edge.
2 Align the screw holes on the palm-rest assembly with the screw holes on the
display hinges.
3 Replace the screws that secure the display hinges to the palm-rest assembly.
4 Route the antenna cables through its routing guides on the palm-rest assembly.
5 Route the display cable through its routing guides on the palm-rest assembly.
GUID-1E9DC9F1-55D8-4679-9922-A95E36C45AA2
Post-requisites
1 Replace the system board .
2 Replace the I/O board .
3 Replace the heat-sink assembly .
4 Replace the computer base .
5 Replace the keyboard .
6 Replace the wireless card .
7 Follow the procedure from step 5 to step 7 in “ Replacing the hard drive ”.
8 Replace the memory modules .
81