Dell Inspiron 13z N301Z Service Manual Download Page 9

Page: 9 / 52

Back to Contents Page

Internal Card With Bluetooth

Wireless Technology

Dell™ Inspiron™ M301Z/N301Z Service Manual

Removing the Bluetooth Card

Replacing the Bluetooth Card

If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.

Removing the Bluetooth Card

Follow the instructions in

Before You Begin

Remove the battery (see

Removing the Battery

Remove the module cover (see

Removing the Module Cover

Remove the keyboard (see

Removing the Keyboard

Remove the palm rest (see

Removing the Palm Rest

Remove the screw that secures the Bluetooth card to the system board.

Lift the Bluetooth card to disconnect it from the connector on the system board.

Replacing the Bluetooth Card

Follow the instructions in

Before You Begin

Align the connector on the Bluetooth card with the connector on the system board, and press down to connect the Bluetooth card to the system board.

Replace the screw that secures the Bluetooth card to the system board.

Replace the palm rest (see

Replacing the Palm Rest

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

screw

Bluetooth card

Summary of Contents for Inspiron 13z N301Z





















































Search results

Summary of Contents for Inspiron 13z N301Z

Reviews:

Related manuals for Inspiron 13z N301Z

Brands by name

Popular brands

Dell Inspiron 13z N301Z, Service Manual

Search results

Summary of Contents for Inspiron 13z N301Z

Reviews:

Related manuals for Inspiron 13z N301Z

Brands by name

Popular brands