Dell Inspiron 13z N301Z Service Manual Download Page 21

Page: 21 / 52

11.

Remove the hinge caps (see

Removing the Hinge Caps

12.

Disconnect the display cable and the camera cable from their connectors on the system board.

13.

Make a note of the routing of the Mini-Card antenna cables and remove the cables from the routing guides.

14.

Remove the six screws (three on each side) that secure the display assembly to the computer base.

15.

Lift and remove the display assembly off the computer base.

Replacing the Display Assembly

Follow the instructions in

Before You Begin

Place the display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base.

Route the Mini-Card antenna cables through the slot on the computer base.

Replace the hinge caps (see

Replacing the Hinge Caps

Connect the display cable and the camera cable to their connectors on the system board.

Replace the Bluetooth card (see

Replacing the Bluetooth Card

Replace the palm rest (see

Replacing the Palm Rest

Replace the keyboard (see

Replacing the Keyboard

Turn the computer over and connect the antenna cables to the Mini- Card(s) (see

step 7

Replacing the Mini-Card(s)

10.

Replace the memory module(s) (see

Replacing the Memory Module(s)

11.

Replace the module cover (see

Replacing the Module Cover

12.

Replace the battery (see

Replacing the Battery

1 display assembly

2 screws (6)

3 camera cable

connector

4 display cable

connector

5 Mini-Card antenna cables

Summary of Contents for Inspiron 13z N301Z





















































Search results

Summary of Contents for Inspiron 13z N301Z

Reviews:

Related manuals for Inspiron 13z N301Z

Brands by name

Popular brands

Dell Inspiron 13z N301Z, Service Manual

Search results

Summary of Contents for Inspiron 13z N301Z

Reviews:

Related manuals for Inspiron 13z N301Z

Brands by name

Popular brands