3.
Remove the display assembly (see
Removing the Display Assembly
).
4.
Remove the display hinge covers (see
Removing the Display Hinge Covers
).
5.
Remove the display bezel (see
Removing the Display Bezel
).
6.
Remove the display hinges (see
Removing the Display Hinges
).
7.
Remove the six screws that secure the display panel to the display cover.
8.
Move the display panel down from the display cover enough to allow access to the camera cable.
9.
Disconnect the camera cable from the camera module.
10.
Remove the display panel from the display cover.
Replacing the Display Panel
1.
Follow the procedures in
Before You Begin
.
2.
Connect the camera cable to the connector on the camera module.
3.
Align the display panel with the display cover using the alignment posts on the display cover.
4.
Replace the six screws that secure the display panel to the display cover.
5.
Replace the display hinges (see
Replacing the Display Hinges
).
6.
Replace the display bezel (see
Replacing the Display Bezel
).
7.
Replace the display hinge covers (see
Replacing the Display Hinge Covers
).
8.
Replace the display assembly (see
Replacing the Display Assembly
).
9.
Follow the instructions from
step 5
to
step 21
in
Replacing the System Board
.
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
screws (6)
2
display panel
3
camera module
4
camera cable
5
display cover
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Summary of Contents for Inspiron 1370
