7.
Using your fingertips, carefully pry up the inside edge of the display bezel.
8.
Remove the display bezel.
Replacing the Display Bezel
1.
Follow the procedures in
Before You Begin
.
2.
Align the display bezel with the display panel, and snap the display bezel into place. Ensure the display and Mini-Card antenna cables route through the
hinge portion of the bezel.
3.
Replace the display hinge covers (see
Replacing the Display Hinge Covers
).
4.
Replace the four screws that secure the display bezel to the display assembly.
5.
Replace the four rubber pads that cover the display bezel screws.
6.
Replace the display assembly (see
Replacing the Display Assembly
).
7.
Follow the instructions from
step 5
to
step 21
in
Replacing the System Board
.
8.
Replace the battery (see
Replacing the Battery
).
Display Hinges
1
display bezel
2
rubber pads (4)
3
screws (4)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Summary of Contents for Inspiron 1370
