Back to Contents Page
Replacing the Inverter Board
Dell™ Inspiron™ 1210 Service Manual
1.
Follow the instructions in
Before You Begin
.
2.
Remove the display assembly. See
Follow the instructions in "Before You Begin" on page 9.
.
3.
Remove the display bezel. See
Replacing the Display Bezel
.
4.
Remove the display panel. See
Replacing the Display Panel
.
5.
Remove the screw that secures the inverter board firmly to the display frame.
6.
Remove the inverter board.
7.
To replace the inverter board, align the inverter board with the protrusion on the display frame.
8.
Replace the screw that secures the inverter board firmly to the display frame.
9.
Replace the display panel. See
Replacing the Display Panel
.
10.
Replace the display bezel. See
Replacing the Display Bezel
.
11.
Replace the display assembly. See
Follow the instructions in "Before You Begin" on page 9.
.
12.
Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
inverter board
2
screw
Summary of Contents for Inspiron 1210
Page 13: ...Back to Contents Page ...
Page 23: ...Back to Contents Page ...
Page 30: ...Back to Contents Page ...
