Back to Contents Page
Replacing the Hinge Cover
Dell™ Inspiron™ 1210 Service Manual
1.
Follow the procedures in
Before You Begin
.
2.
Open the display as far as possible.
3.
Pry out the hinge cover from side to side.
4.
Remove the hinge cover.
5.
To replace the hinge cover, align the tabs on the hinge cover to the top of the keyboard and press the hinge cover back in place.
6.
Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
1 hinge cover 2 securing tabs
Summary of Contents for Inspiron 1210
Page 13: ...Back to Contents Page ...
Page 23: ...Back to Contents Page ...
Page 30: ...Back to Contents Page ...
