background image

Dell™ Inspiron™ 1210 Service Manual 

 

 

Notes, Notices, and Cautions 

Information in this document is subject to change without notice. 

© 2008 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, and

 Inspiron 

are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell 

under license; 

Microsoft

Windows, Windows Vista, 

a n d

 Windows Vista start button 

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or 

other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Model PP40S

 

September 2008 Rev. A00 

Before You Begin

 

Replacing the Hinge Cover

 

Replacing the Keyboard

 

Replacing the Palm Rest

 

Replacing the Display

 

Replacing the Internal Card With Bluetooth

® 

Wireless Technology

 

Replacing the Hard Drive

 

Replacing the Power Button Board

 

Replacing the Speaker

 

Communication Cards

 

Replacing the Power Cable

 

Replacing the 2-in-1 Processor and Memory Board

 

Replacing the Coin-Cell Battery

 

Replacing the CRT Board

 

Replacing the Camera

 

Replacing the Inverter Board

 

Replacing the USB Board

 

Replacing the System Board

 

Flashing the BIOS

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Inspiron 1210







































Reviews: