Dell Inspiron 1150 Service Manual Download

Page: 2 / 62

Dell Inspiron 1150 Service Manual

Dell™ Inspiron™ 1150 Service Manual

Before You Begin
System Components
Memory, CD or DVD Drive, Modem, and Mini PCI Card
Hard Drive
Keyboard
EMI Shield
Display
Palm Rest
Microprocessor Thermal-Cooling Assembly
Microprocessor Module
Speakers
System Board
Flashing the BIOS
Base Plastics
Pinout Assignments for I/O Connectors

Notes, Notices, and Cautions

NOTE:

A NOTE indicates important information that helps you make better use of your

computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you

how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or

death.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the

Tell Me How

help file.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows®

operating systems are not applicable.

Information in this document is subject to change without notice.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAP..._checked%20ok/Inspiron/1150/1150%20SM/index.htm (1 of 2)6/21/2004 12:40:56 AM

Summary of Contents for Inspiron 1150































































Search results

Summary of Contents for Inspiron 1150

Reviews:

Related manuals for Inspiron 1150

Brands by name

Popular brands

Dell Inspiron 1150, Service Manual

Search results

Summary of Contents for Inspiron 1150

Reviews:

Related manuals for Inspiron 1150

Brands by name

Popular brands