Replacing the speaker
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Insert the rubber stubs on the speaker into the slots on the palm-rest and
keyboard assembly and snap the speaker into place.
2
Route the coin-cell battery cable through the routing guide on the speaker.
3
Connect the speaker cable to the system board.
Post-requisites
1
Follow the step 4 procedure in “
”.
2
Replace the
.
3
Follow the procedure from step 2 to step 5 in “
”.
57
