manualshive.com logo in svg

Dell I15R-2105SLV, Owner'S Manual

Share
Download
Dell I15R-2105SLV Owner'S Manual Download Page 81

80

    |    Mini-Card

3

Lift the Mini-Card out of the connector on the daughter board.

 

CAUTION: When the Mini-Card is not in the computer, store it in protective 
antistatic packaging. For more information, see "Protecting Against Electrostatic 
Discharge" in the safety information that shipped with your computer.

Replacing the Mini-Card

Procedure

1

Remove the new Mini-Card from its packaging.

2

Align the notch on the Mini-Card with the tab on the connector on the daughter 
board.

 

CAUTION: Use firm and even pressure to slide the Mini-Card into place. If you use 
excessive force, you may damage the connector.

 

CAUTION: The connectors are keyed to ensure correct insertion. If you feel 
resistance, check the connectors on the Mini-Card and on the daughter board, 
and realign the Mini-Card.

 

CAUTION: To avoid damage to the Mini-Card, never place cables under the 
wireless Mini-Card.

3

Insert the Mini-Card connector at a 45-degree angle into the connector on the 
daughter board.

Summary of Contents for I15R-2105SLV























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands